CP-40 Organoclay for Grease Lubricating
Our high-purity Organoclay Rheological Additive, derived from calcium-modified bentonite clay powder, is designed to enhance the performance of lubricating greases. When incorporated into grease formulations, this organophilic clay provides excellent high-temperature resistance, working stability, and water resistance, ensuring reliable performance under demanding conditions.
CP-40 Organoclay for Grease Lubricating
CP-40 is a modified bentonite organoclay specifically developed for use in solvent-based systems. It is effective across a wide range of solvents, from low polarity to medium-high polarity, offering superior thickening and rheological control. CP-40 delivers enhanced stability and improved suspension properties, making it an ideal choice for a variety of industrial and commercial applications.
| Organic bentonite Composition | Organic derivative of a montmorillonite clay |
| Organic bentonite Appearance | Fine powder,white |
| Organic bentonite Moisture content(105 Degree,2hr) | ≤3.5% |
| Organic bentonite Loss on ignition (1000℃) | 28%-31% |
| Organic bentonite Bulk density | 0.53g/cm3 |
| Organic bentonite Fineness (<74μm, %) | ≥98% |
Advantages of CP-40 Organoclay for Grease Lubricating
Our Organic bentonite has many advantages.
- High gelling efficiency,high viscosity
- Wide application range, it can be applied in all low, middle and high polarity range
- Produce reproducible thixotropic consistency over a wide temperature range
- Imparts particle suspension, preventing hard settling of pigment and fillers
- Exerts strong film reinforcing action in organic binder systems
Application of CP-40 Organoclay for Grease Lubricating
Our Organic bentonite is used in：
- Marine paint, Industrial paint, heavy-duty, anticorrosion paint such as bituminous coatings, epoxy paints, chlorinated rubber paints
- Grease
- Inks
- Sealant
Storage of CP-40 Organoclay for Grease Lubricating
Modified Bentone CP-40 Store in a dry, well-ventilated area with temperature of 0℃-30℃. Keep container closed. The quality guarantee period is 24 months.
Organic Bentonite Powder Using
CP-40 disperses under high shear and requires a polar activator for best efficiency. Heat is not required to obtain good dispersion. Addition levels are typically in 0.2%~2.0%. Polar activator (95% Ethanol or 95% Methanol) is needed. Normally addition level of polar activator is recommended to be 45%~60% of CP-40 in weight. If in xylene system, addition level of polar activator is about 30%-40% of CP-40 in weight.
Pre-gel is made as below procedure.
- Charge solvent to mill
- Slowly add CP-40 (6-10% by weight of total pre-gel) to mill under agitation.
- Mix at high speed for 5 minutes.
- Add polar activator.
- Mix at high speed for 5 minutes.
Packing & Delivery
Packing of Organic Bentonite:
The package: Kraft bag or kraft complex interior with PE or customized
Packing size: 25kg/bag ,50lb/bag, 600kg/bag or customized.
15MT/20FCL with pallet, 18MT/20FCL without pallet, 25.2MT/40FCL with pallet.
The delivery date is 7 to 10 days after receiving deposit.