Organoclay Filtration Control Additive
Premium organoclay filtration control additives engineered for superior fluid loss control in oil-based drilling systems. Delivering exceptional performance under extreme downhole conditions with enhanced formation protection.
Superior Filtration Control For Oil-Based Drilling Systems
Our organoclay filtration control additives are specifically engineered to minimize fluid loss in oil-based drilling muds while maintaining optimal rheological properties. These high-performance additives create effective filter cakes that protect formation integrity and enhance drilling efficiency.
Effective Filtration Control
Maintains fluid loss below 5mL under HTHP conditions, ensuring wellbore stability and formation protection.
- • HTHP fluid loss < 5mL
- • Thin, low-permeability filter cake
- • Excellent cake quality
High Temperature Stability
Maintains performance integrity up to 230°C, suitable for deep well and geothermal applications.
- • Stable up to 230°C
- • Pressure stable to 108Pa
- • Thermal degradation resistance
System Compatibility
Compatible with various oil-based mud systems including diesel, mineral, and synthetic base oils.
- • Diesel oil systems
- • Mineral oil systems
- • Synthetic base oils
Technical Specifications Engineered for Performance
Comprehensive technical data and performance characteristics for optimal drilling fluid formulation and application.
Physical Properties
Performance Characteristics
Available Grades
Specialized formulations for different drilling conditions
| Grade | Primary Application | Base Oil System | Max Temp (°C) | Dosage (lb/bbl) |
|---|---|---|---|---|
| CP-2 | Standard filtration control | Diesel, Mineral oil | 200 | 0.5 - 1.5 |
| CP-150 | High temperature applications | Synthetic, Alpha olefins | 230 | 0.75 - 2.0 |
| CP-EZ | Easy dispersion, rapid gelation | All oil-based systems | 220 | 0.5 - 1.75 |
| CP-982 | Low aromatic base oils | Low BTEX, Mineral oil | 210 | 0.75 - 1.5 |
| CP-992 | Premium performance | Synthetic, Ester-based | 230 | 1.0 - 2.0 |
Application Guidelines Optimal Usage Procedures
Step-by-step procedures for effective incorporation and maximum performance in drilling fluid systems.
Mixing Procedure
Pre-heat Base Oil
Heat the base oil system to 60-70°C if conditions permit. This enhances dispersion efficiency.
Add Organoclay
Add organoclay slowly while maintaining agitation. Typical dosage: 0.5-2.0 lb/bbl depending on grade and requirements.
High Shear Mixing
Apply high-speed mixing for 10-15 minutes to ensure complete dispersion and activation.
Add Polar Activator
Add polar activator (methanol/water 95:5) at 30-40% by weight of organoclay. Mix for additional 15-20 minutes.
Final Processing
Process through colloid mill or homogenizer for optimal particle size distribution and performance.
Performance Optimization
Temperature Control
Maintain optimal mixing temperature for better dispersion and gel formation.
Shear Rate Management
Use appropriate shear rates to prevent over-mixing while ensuring complete activation.
Aging Time
Allow sufficient aging time (16-24 hours) for optimal rheological development.
Base Oil Compatibility
Technical Support & Consultation
Our experienced technical team provides comprehensive support for filtration control additive selection, application optimization, and troubleshooting. Contact us for customized solutions and field support.
Application Engineering
Customized formulation recommendations based on specific drilling conditions and requirements.
Field Support
On-site technical assistance and troubleshooting for optimal drilling fluid performance.
Quality Assurance
ISO9001 certified production with comprehensive quality control and batch traceability.
Contact Our Experts
Hangzhou, China 310013
Request Technical Data Sheet
Get detailed specifications and application guidelines